• @i_stole_ur_taco@lemmy.ca
      link
      fedilink
      4121 days ago

      You need to rotate your pc case if the VGA port isn’t vertical. The ground pins always need to be on top so all those grounding electrons weigh down the other conductors to make the data flow more quickly.

        • RBG
          link
          fedilink
          820 days ago

          Can confirm.

          Source: am grounding electron.

      • @tetris11@lemmy.ml
        link
        fedilink
        10
        edit-2
        20 days ago

        That’s not true. VGA is a horizontal spec with the entire trapezoid housing being the ground contact. The data electrons to one side is due to the earth’s axial tilt spinning them into a corner via healing crystals.

    • andrew_bidlawOP
      link
      fedilink
      English
      21
      edit-2
      21 days ago

      That’s when you use the ports placed on the motherboard in a standard verical PC case, meaning the system uses integrated graphics for the visual output instead of deticated videocard. Videocards that are put into MB at 90° are horizontal, right, but in most office setups I handle they are rare nowadays. Videocards are almost exclusively installed when you handle 3d and content rendering in demanding apps, and for office and browser stuff they are too costy after the crypto price hike and in a sanctioned Russia.

      Nettops have horizontal motherboards tho.

    • @BearOfaTime@lemm.ee
      link
      fedilink
      621 days ago

      Many machines have vertical connectors, if the machine is turned for any reason. Or you’re using the on-board card, etc.

  • @AlternateRoute@lemmy.ca
    link
    fedilink
    English
    5721 days ago

    Haven’t plugged in a VGA cable in a long time. As someone else pointed out it depends if it is temporary or long term… I always screw them in if it is long term

    • @EonNShadow@pawb.social
      link
      fedilink
      1020 days ago

      Lucky you lmao

      I still see them once every so often

      In fact, I went onsite to a customer who wanted a new PC set up because the old one “wouldn’t boot”. Sure enough the cable was sticking out of the monitor at about a 15deg angle. I pushed the VGA cable in a bit extra hard and it came right back.

      I was out of there in about 30min.

  • MostRandomGuy
    link
    fedilink
    English
    2620 days ago

    For quickly testing something: fuck screws.

    For long-term use: both a tight as I can so I barely can unscrew them later because why not.

  • Scott
    link
    fedilink
    English
    1720 days ago

    Long term use, at least one

    Temporary, fuck the screws all together

    • @flambonkscious@sh.itjust.works
      link
      fedilink
      English
      720 days ago

      And it was always temporary!

      I’ve had less fall out than I had cases where the screw stuck in the socket and it started unscrewing out of the motherboard that I just gave up on them altogether

    • @BearOfaTime@lemm.ee
      link
      fedilink
      421 days ago

      Hahaha, I can’t disagree, even as a heathen.

      As others have said, depends on how permanent something is

  • UKFilmNerd
    link
    fedilink
    English
    1121 days ago

    Jesus Christ, both!! 😆 But only finger tight. Sod you bastards who get the screwdrivers out! That’s overkill. 😁

  • @Fermion@feddit.nl
    link
    fedilink
    1021 days ago

    Who does just one? That’s worse than not doing either. Since they’re captive screws, doing just one can force the connector to wedge in crooked. I’ve had issues with tightening one too far before starting the threads on the other. Sometimes you have to go back and forth a couple times

    • andrew_bidlawOP
      link
      fedilink
      English
      221 days ago

      After you properly connected it, sealing just one seems okay, isn’t it?

      • @BlueSquid0741@lemmy.sdf.org
        link
        fedilink
        420 days ago

        If you tighten just one side, it can pull the connector in that direction. Think of tightening heatsink screws unevenly on each side.

        • andrew_bidlawOP
          link
          fedilink
          English
          120 days ago

          These seem way more forgiving tho. Up to the point you can connect it hot and working and it’d go nice.

  • @kyub@discuss.tchncs.de
    link
    fedilink
    English
    920 days ago

    Well that’s retro but I used to only screw in the side that’s easier to reach because that already secures it while also allowing you to more easily unplug it again.

  • Semi-Hemi-Lemmygod
    link
    fedilink
    English
    921 days ago

    Pro tip: It’s a lot easier f you twist both knobs at the same time using the same motion as opening a bottle cap.