andrew_bidlaw to Asklemmy@lemmy.mlEnglish • 9 hours agoDo you screw in both bolts on VGA cables, just the top one or ignore them altogether?sh.itjust.worksimagemessage-square68fedilinkarrow-up171arrow-down13
arrow-up168arrow-down1imageDo you screw in both bolts on VGA cables, just the top one or ignore them altogether?sh.itjust.worksandrew_bidlaw to Asklemmy@lemmy.mlEnglish • 9 hours agomessage-square68fedilink
minus-square@Psythik@lemmy.worldlinkfedilink16•3 hours agoBoth every time but I also haven’t used a VGA cable in at least 15 years.
minus-square@EonNShadow@pawb.sociallinkfedilink4•3 hours agoLucky you lmao I still see them once every so often In fact, I went onsite to a customer who wanted a new PC set up because the old one “wouldn’t boot”. Sure enough the cable was sticking out of the monitor at about a 15deg angle. I pushed the VGA cable in a bit extra hard and it came right back. I was out of there in about 30min.
Both every time but I also haven’t used a VGA cable in at least 15 years.
Lucky you lmao
I still see them once every so often
In fact, I went onsite to a customer who wanted a new PC set up because the old one “wouldn’t boot”. Sure enough the cable was sticking out of the monitor at about a 15deg angle. I pushed the VGA cable in a bit extra hard and it came right back.
I was out of there in about 30min.