@einfach_orangensaft@feddit.de to linuxmemes@lemmy.world • 2 years agoRaspberryPi NAS problems be likefeddit.deimagemessage-square72fedilinkarrow-up1244arrow-down12
arrow-up1242arrow-down1imageRaspberryPi NAS problems be likefeddit.de@einfach_orangensaft@feddit.de to linuxmemes@lemmy.world • 2 years agomessage-square72fedilink
minus-square@Snipe_AT@lemmy.atay.devlinkfedilink-3•2 years agoI just bought this, we’ll see how easy it is to setup. Do you still run raspian on it, or something else?
minus-square@bdonvr@thelemmy.clublinkfedilink2•2 years agoVery easy. https://www.makeuseof.com/boot-raspberry-pi-4-via-ssd-network/ I used to run Fedora, now openSUSE on mine.
minus-square@Snipe_AT@lemmy.atay.devlinkfedilink-2•2 years agodo you use a separate power for the sad? or just leave it plugged into the raspi?
minus-square@bdonvr@thelemmy.clublinkfedilink2•2 years agoNo, it’s a NVMe to USB-C enclosure, with a USB-A to C cable connecting it to the Pi. No external power.
minus-squareTreczokslinkfedilink1•2 years agoI run ubuntu server on my RPi 4 with USB3 SSD. No issues so far, but needs a good PSU. Survived a blackout without an issue.
minus-square@Snipe_AT@lemmy.atay.devlinkfedilink-3•2 years agodo you use a separate power for the sad? or just leave it plugged into the raspi?
minus-squareTreczokslinkfedilink1•2 years agoNo separate power, the USB3 SSD has only one USB-C connector, and draws a maximum of 250 or 300 mA under load for its nearly one TB. As the USB port is rated for 500mA, I’m quite safe.
M.2 sata to usb enclosure
I just bought this, we’ll see how easy it is to setup. Do you still run raspian on it, or something else?
Very easy. https://www.makeuseof.com/boot-raspberry-pi-4-via-ssd-network/
I used to run Fedora, now openSUSE on mine.
do you use a separate power for the sad? or just leave it plugged into the raspi?
No, it’s a NVMe to USB-C enclosure, with a USB-A to C cable connecting it to the Pi. No external power.
I run ubuntu server on my RPi 4 with USB3 SSD. No issues so far, but needs a good PSU. Survived a blackout without an issue.
do you use a separate power for the sad? or just leave it plugged into the raspi?
No separate power, the USB3 SSD has only one USB-C connector, and draws a maximum of 250 or 300 mA under load for its nearly one TB. As the USB port is rated for 500mA, I’m quite safe.