NFS gives me the best performance. I’ve tried GlusterFS (not at home, for work), and it was kind of a pain to set up and maintain.

You can always create posts in appropriate communities to start conversations on topics you’re interested in. Be the change you wish to see in the world.

I don’t care much for most pop culture stuff and get enough by happenstance from other sources/people.

If it works, I don’t update unless I’m bored or something. I also spread things out on multiple machines, so there’s less chance of stuff happening like you describe with the charts feature going away. My NAS is pretty much just a NAS now.

You can probably backup your configs/data, upgrade, then deploy jellyfin again, restore, and reconfigure. You should probably backup your data on your ZFS pool. But, I recently updated to the latest TrueNas Scale from ~5 year old FreeBSD version of TrueNas and the pools still worked fine (none of the “apps” or jails worked, obviously). The upgrade process even ported my service configurations over. I didn’t care about much of the data in the pools, so only backed up the most important stuff.

I personally use a dual core pentium with 16GB of RAM. When I first installed TrueNas (FreeNas back then), I only had 8GB of RAM, but that proved to be not enough to run all the services I wanted, so I would suggest 12-16GB. Depending on the services you want to run any multi-core x86 CPU that allows 16GB of RAM to be used should be adequate. I believe TrueNas recommends ECC RAM, but I don’t think using consumer grade RAM and hardware has caused me any problems. I’m also using an old SSD for the system drive, which I is recommended now (I used to use 2 mirrored USB thumb drives, buy that’s not recommended anymore). Very importantly, make sure the HDD(s) you get are not shingled drives; made that mistake initially, and performance was ridiculously bad.

Could use it kind of like an extra monitor with something like Barrier.

Could use it like a home assistant for a kitchen or something, but I don’t know if there’s any good privacy respecting software for that ATM (looks like MyCroft went bankrupt).

I used an old laptop I had laying around for controlling a Maslow CNC. Could also use a laptop to run OctoPrint or something.

Hmm. Looks like that was in Texas too. https://truthout.org/articles/a-city-in-texas-just-put-10000-bounties-on-trans-people-using-the-bathroom/, and they’re going to pass quite a few more bounty laws yhis year: https://prismreports.org/2025/01/08/bounty-laws-texas-trans-rights-abortion/

Dunno, they’d probably have a hard time suing European instances, but they can’t outright block, as that would be unconstitutional. U.S. states have recently been using lawsuits to get around constitutionality. I.e. Texas also has a “bounty” law, where if you know a woman went out of state to get an abortion, you can report it, and the state will sue them and give you $10,000. I think another state has a similar law for if you see a trans person using a restroom that doesn’t match the genitalia they were born with.

With the current laws on the books, Texas could probably sue Lemmy instances because they contain pornographic content and they don’t verify users’ identity.

Oldest I got is limited to 16GB (excluding rPis). My main desktop is limited to 32GB which is annoying, because I sometimes need more. But, I have a home server with 128GB of RAM that I can use when it’s not doing other stuff. I once needed more than 128GB of RAM (to run optimizations on a large ONNX model, iirc), so had to spin up an EC2 instance with 512GB of RAM.

I just use Joplin, encrypted, and synced through dropbox. Tried logseq, but never really figured out how to use its features effectively. The notebook/note model of Joplin seems more natural to me. My coding/scripting stuff mostly just goes into git repos.

The PC I’m using as a little NAS usually draws around 75 watt. My jellyfin and general home server draws about 50 watt while idle but can jump up to 150 watt. Most of the components are very old. I know I could get the power usage down significantly by using newer components, but not sure if the electricity use outweighs the cost of sending them to the landfill and creating demand for more newer components to be manufactured.

CK2 - 400h

Fallout NV (guessing most of this has been TTW) - 190h

Stellaris - 180h

Xcom 2 - 140h

GTA 5 - 99h

Cities Skylines - 95h

Skyrim - 90h

Civ5 - 85h

Xcom - 83h

The other games I’ve played are pretty much the standard play-through times. (< 70h)

You can also just install the libreelec os (Kodi), and install the Jellyfin Kodi addon. Haven’t tried that addon. I used to use Kodi when I had only one TV, and liked it. Now that I have 2 Android TVs, just installing Jellyfin on the TVs works fine. I might go back to rPIs and disconnect my TVs from the internet though.

Apple uses Arm for their desktops, including the Mac Pro workstation. I don’t know of anything upgradable/customizable like x86 Desktops though.

Bellingcat

I remember liking Opposing Force and Blue Shift too.

I don’t think federation has to be an obstacle for non-tech people. They don’t really have to know about it, and it can be something they learn about later. I really don’t know if federation stops people from trying it out. Don’t people think, “I don’t know what instance to join, so I’m not going to choose any?”

Personally, having no algorithm for your home feed is what I don’t like about it. Everything is chronological. Some people I follow post many times a day, some post once per month, some post stuff I’m extremely interested in sporadically, followed by a sea of random posts. Hashtag search and follow is also less useful because there’s no option for an algo.

The UI seems fine to me. I guess I’m not picky about UIs. The one nitpick I have is on mobile, tapping an image will just full-screen the image instead of opening the thread.

I haven’t checked it out in years. From my understanding, IPFS aims to be a distributed filesystem that kinda works like Bittorent. If you access a file, you then seed it. Last time I checked it out, the project was jumping on the crypto bandwagon… Just checked out their website now, and don’t know WTF it is.

Yeah, I agree. I do use Flatpaks, Snaps, and Appimages sometimes if I can’t find a suitable deb repo/package. Flatpak is the best out of the three because they do try to avoid too much duplication through runtimes. I also use Docker quite a bit, which has similar issues (and benefits).

I assume the “kill it” comment was a little tongue-in-cheek. On small SBCs, like a Pi, or old hardware, it could be a problem. I’ve seen people with flatpaks taking up 30GB of space, which is significant. I’m not sure how much RAM it wastes. I assume running 6 different applications that have loaded 6 different versions of Qt libraries would also use significantly more RAM than just loading the system’s shared Qt libraries once.